DC04-IFR-SP Decoder Installation

On this page you will find all the information for installing the DC04-IFR-SP decoder.

The information for the DC04-SI is here.

DC-04=IFR-SP:

 

1.2 Volt NiMH/NiCad

 

2.4 Volt NiMH/NiCad

 

3.6 Volt NiMH/NiCad

Note that the transformer is marked with a red spot.

 

LiPo Battery

Note that the transformer is marked with a red spot.

 

Stationary Models

 

Stationary Models

 

Options

Powering a DC04 from a DCC controller

Powering a DC04 from a transformer

Infra-red Photo-transistor/LEDs:

Disclaimer:
This page has been translated, with permission, from a page on Claus Ilchmann’s web site.
The original page, in German, is located here.
This translation is provided with no guarantee of accuracy or liability for errors.
Should you decide to use the DC-Car system then you should check that the functionality meets your needs by reference to the manufacturer’s web site.

Introduction

How did the DC-CAR
system evolve?

DC-Car Decoder

DC-Car DC04 decoder

How does the
automatic braking
system work?

How does the
digital control
work?

What do I need
to fit DC-Car
to a vehicle?

Using DC-Car in
stationary models

Driving using a
DCC controller

Driving using
DC-Car
function modules